Page 1 of 1

CRCXL upgrading the front end

PostPosted: Sun Jul 01, 2012 2:36 pm
by dazzzza
Hi guys
does this look right as the parts o need to upgrade the front end to the other bearing (Luke Tim)
cal 1248
cal 4731
cal 3221
cal 1236
i got the part numbers form action models web page
cheers guys

Re: CRCXL upgrading the front end

PostPosted: Mon Jul 02, 2012 8:59 pm
by Tim Fry
Daz

Not entirely sure but I would say download the GenXi manual form the CRC website and it will you the right numbers.

Re: CRCXL upgrading the front end

PostPosted: Mon Jul 02, 2012 9:38 pm
by dazzzza
Thanks Tim i did but might just get the xl to xi conversion as the parts are in that and i get a little upgrade.