Page 1 of 1

Step screw for M03 C-Hub

PostPosted: Sat Feb 22, 2014 10:52 am
by kayotic
HI all

I was just checking over Ethan's car for racing tomorrow and noticed that he is missing a step screw from the front c-hub. Unfortunately I don't have spare that fits as it appears to be some form of Yeah racing hop-up that was on the car when we got it. Without it he probably won't be able to race tomorrow :(

He probably lost it in the Mini B final and was just wondering whether anyone handed a small step screw with a hexagonal head in to race control last weekend.

Regards

Eddie

Re: Step screw for M03 C-Hub

PostPosted: Sat Feb 22, 2014 11:06 am
by Brian Mills
Hi Eddie,

I have the PC box at home to load a software update, and in the box there are a few odds and ends that were picked up from the carpet as we cleared up.
There is a shiny shouldered hex screw that has a round head. Does that soumd like it? We also have a pot full of odds and ends so there may be something in there.
Also Darren at Pit Bitz may be able to help if he is coming tomorrow.

Regards
Brian

Re: Step screw for M03 C-Hub

PostPosted: Sat Feb 22, 2014 12:19 pm
by Bosscat
I do know that Darren will not be at WK tomorrow however I have some step screws and the like in my box you are welcome to have a look through and see if anything might help.
Come find me in the morning I'll bet we can sort something to get you running.

Keith

Re: Step screw for M03 C-Hub

PostPosted: Sat Feb 22, 2014 12:33 pm
by Dan Hamblin
Can always lend you some bits off my M-03 if required.

Regards,

Dan

Re: Step screw for M03 C-Hub

PostPosted: Sat Feb 22, 2014 2:04 pm
by kayotic
Thanks all for your responses. Ethan and I will be down tomorrow and hopefully we'll be able to find a fix for him.

See you Sunday.